Select Page

2. Linking your first sensor

  1. Before linking your sensor, perform the following:
  • Turn Bluetooth® ON
  • For Android devices, turn Location Services ON which Android requires when linking to Low Energy Bluetooth devices
  • Make sure you have an internet connection
  • Remove the plastic film on the front of the sensor
  • IMPORTANT: Before beginning the linking process, make sure all other sensors are at least 10 feet away from the sensor you are linking.
  1. Open the Taylor Guitars App and then from the My Guitars screen select the + button in the upper right-hand corner.

3. When prompted, insert the 9-volt battery into the battery box and follow the on-screen instructions. If you have previously inserted the battery before linking the sensor, remove the battery box from the sensor, then re-install the battery box into the sensor. When the battery is installed or the battery is re-installed, make sure the LED on the front of the sensor blinks 4 times.

  1. If it fails, check your Bluetooth and internet connection and select Link Now. If linking the sensor continues to fail, please contact support.

 

 

  1. Wait for the linking process to complete then tap “Finish & Save”.

  1. Enter the sensor profile information on the Details screen. When completed, tap Continue.

 

  1. Your sensor is now linked to your account. Anytime you are logged in on a compatible device, you will automatically be able to connect, collect, and view data.